Change Your Dynamic IP Address

This is suppposed to change your dynamic IP Address.

Open notepad and type 

ipconfig /flushdns
ipconfig /refresh
ipconfig /renew
ipconfig /all>newip.txt
end 

then save as (select all file types) — ip.bat

this is now a batch file rather than a txt file. Simply hit run on the file and watch the progress.

If you want to print out the results then add this line into the same file befoe “END”

ipconfig /all>filename. txt

A report will be saved in the same directory as your batch file, detailing your new ip and a bit more…

Share This

Connecting Your Computers

For the best experience using the Files and Settings Transfer Wizard, you will want to connect your two computers together. You can connect your computers either by using a null modem serial cable or by using Home networking.

Connecting With A Serial Cable

The easiest way to connect your computers is to use the null modem serial cable. To use the null modem serial cable:

Both computers must have an available serial port (also called a COM port).
You must have a null modem serial cable (also called a LapLink serial cable or a serial file transfer cable).
The serial cable must be long enough to connect the computers together.

Connecting With Home Networking

The best way to connect your computers together is to use Home networking. Although the setup is more complex, your files and settings will transfer faster. If you are planning to keep both your old computer and your new computer, you might want to consider creating a Home network.

To use Home networking:

Both computers must have a network interface card or a USB network interface installed. The jack looks like a slightly larger telephone jack.
You must have network cable, and in most cases a hub.

The network cable must be long enough to connect the computers together.
Note: A wireless network will not need network cable or a hub.

Run the Network Setup Wizard to set up your Home network.

Share This